In Multiple run, Same condition got different results.
I'd like to run a simulation under a range of operating condition. So, I use current and voltage as two input varibles and power loss as output varibles. For example. First, I use a normal simulation and got the results, Ploss=5mJ(I=10A, V=300V), Ploss=8mJ(I=15A,V=350V). I use the multiple run setting I(from 10A to 15A, step 5A),V(from 300V to 350V, step 50V). Then I got the results Ploss=5mJ(I=10A, V=300V),Ploss=3mJ(I=15A, V=350V). Then I change the multiple run setting I(from 15A to 10A, step 5A),V(from 350V to 300V, step 50V) I got the results Ploss=2mJ(I=10A, V=300V),Ploss=8mJ(I=15A, V=350V). Hence, It seems like in the multiple only the first run simulation is correct. I don't know why the same condition got different results depends on whether it is in the first run or not.